Isolation power block 抑振隔離電箱

MA-PB75A-6 BASIC III Isolation power block

75A單相6路輸出隔離避震電箱
  • aa
  • bb
詳細介紹

讓MA靜神以成熟、高層次的隔離抑振電箱,匯聚電源能量之庫,展現全頻寬的分流性能

成功的電箱要件,不外乎擁有完整的設計、縝密的佈局、執行優質高效的能量分配,並快速釋放電位差,讓電能以充沛且快速的電路前進。MA靜神一直追求著自我的極限,旗下隔離抑振電箱經歷了數代的演進,採以最完善、完整的線路佈局,加上精良且特殊的零組件,將入戶電能作第一次的醇化處理。

MA靜神的隔離抑振電箱,內外部件全都採用訂製組件,箱體採用厚鐵鍍鋅、並覆以特殊高溫烤漆處理,給予隔磁、抑振、穩固的基石,內部斷路器採用台灣大廠的「客製」無熔絲閘,從外觀看來與一般市售相仿,常被質疑為何不用國外知名的品牌,但這樣的崇洋心結,不僅看低台廠,也完全低估了MA靜神的嚴苛標準;與我們合作的台廠,其技術與性能都可依需求要求、且支援度高,再複雜的工序都能幫忙搞定,並強化高規結構製程封裝,如無熔絲的核心介電,在持續不斷的大電流經過絕緣材時,能夠完全隔絕電磁輻射與弱電的干擾,確保高介電值、耐大電流電壓的高效性能,完整傳輸極大化的電能頻寬,這些都是現成市售品所無法相比的。MA靜神歷經長時間的開發研究,專注於精確的音響電源這領域,將別人做不到的極寬頻,透過「MA靜神電源系統」重新展現,這是市面上常見的拼裝電源所到達不了的,而MA靜神堅持關鍵的每個環節都不能錯放,最終才能擁有豐潤、飽滿、充沛、純淨的寬頻電能。此外,L相(火線)、N相(水線)的分閘不用一般傳統的電源線,採用特別訂製的高階銅板,經CNC切型後、處以細緻打磨,最後鍍上電子級貴金屬,保持最佳的金屬物理條件,其耐高電壓、高電流、高速傳導的特性,與半永久性的穩定條件,展現出極為優異的電源傳輸性能,表現出不凡的全方位導電能力。

而同樣工法也用在G相(地線)上,搭配上PG-16接地匯流排,讓電位差能更加快速的釋放。箱內更為了隔離與抑振,特別加上金屬隔離板與增加強化結構點,讓全頻寬電源在安定穩固的機箱內流暢地分流出去,任何會影響電源品質的小細節都不放過;玩家還能選購MA靜神的「Basic MKⅡ or Studio MKⅡ 超級接地器」、「M-460 複合地迴接地板」,更能讓接地的性能翻倍躍進,這同時也是淨化電源的重要核心之一,我們強烈建議「進入室電的第一步」千萬不容小覷,別讓拼裝車在一開始就虛化了電源能量,選擇MA靜神電源系統,將是您翻轉平凡電源的第一步,極致音響電源的無限可能從此開始。
 

Let MA 靜神 mature and high-level isolation and damping power box gather the power energy pool and exhibit full bandwidth performance in current distribution.

The key to a successful power box lies in having a complete design, meticulous layout, efficient energy distribution, and quick release of potential difference, allowing electrical energy to move through the circuit with abundant and rapid flow. MA 靜神 has always pursued its limits, and its isolation and damping power box has undergone several generations of evolution, adopting the most complete and sophisticated circuit layout, coupled with high-quality and special components to perform the first refinement of incoming electrical energy.

The internal and external components of MA 靜神 isolation and damping power box are all customized components, with the box body using thick galvanized iron and coated with special high-temperature baking paint treatment, providing a foundation of magnetic isolation, damping, and stability. The internal circuit breaker uses a customized, fuse-less gate from a major Taiwanese manufacturer, which looks similar to those commonly found in the market, often leading to questions as to why it doesn't use well-known foreign brands. However, such a mentality not only underestimates Taiwanese manufacturers but also underestimates MA 靜神 stringent standards. The Taiwanese manufacturers we work with have high technical and performance support, allowing them to assist with even the most complex procedures, and they reinforce the high-specification structural packaging process, such as the core dielectric without a fuse. When a continuous high current passes through the insulating material, it can completely isolate electromagnetic radiation and weak electrical interference, ensuring high dielectric value and efficient performance of high current voltage, and maximizes the transmission of electrical energy bandwidth. These are not achievable by readily available off-the-shelf products. After a long period of research and development, MA 靜神 has focused on the precise field of audio power supply, demonstrating the extremely wide bandwidth that others cannot achieve through the "MA 靜神 Power System". This is beyond what is achievable by commonly seen assembled power supplies on the market. MA 靜神 insists that every critical link must not be misplaced to finally have rich, full, abundant, and pure wide-band electrical energy. In addition, the distribution of L phase (fire line) and N phase (water line) does not use traditional power cords, but instead uses specially customized high-end copper plates that have been CNC-cut and finely polished, and finally plated with electronic-grade precious metals, maintaining optimal metal physical conditions. With high voltage, high current, high-speed conduction characteristics, and semi-permanent stability, it exhibits extremely outstanding power transmission performance and demonstrates extraordinary all-around conductivity capability.

The same technique is also used on the ground wire, or G-phase, paired with a PG-16 grounding busbar to allow for the rapid release of potential differences. Inside the enclosure, metal isolation plates and reinforced structural points are added for isolation and vibration suppression, ensuring the smooth distribution of the full bandwidth power within a stable and secure chassis. No small details that may affect power quality are overlooked. Players can also choose to purchase the "Basic MK II or Studio MK II Super Grounding Device" and the "M-460 Composite Ground Looping Board" from MA 靜神, which can double the performance of grounding and serve as a crucial core of power purification. We strongly recommend not underestimating the importance of "the first step into room power," as starting with a makeshift car may dissipate power energy from the beginning. Choosing the MA 靜神 power system will be your first step in transforming an ordinary power source and unlocking the infinite possibilities of an ultimate audio power source.

MA-PB75A-6  basic III Isolation power block 75A單相6路輸出隔離避震電箱
  • 75A單相隔離電源模組、6路輸出(4路20A、2路30A)
  • 穩固且防震的電箱結構設計
  • 優質厚導電銅板,並處以精緻拋光
  • 並將水、地導電銅板鍍上不同貴金屬
  • -196°C深冷處理
  • 機箱採用特殊高品質噴砂烤漆
  • 外部尺寸:W38.6 x H50.6 x D17.6cm
  • 重量:約 23.6 kg±5%
75A single-phase isolated power module, 5 outputs (3 x 20A, 2 x 30A)
Sturdy and shock-resistant power box structure design
Precision CNC three-phase high-purity conductive copper plate
Three-phase copper plates are electroplated with three layers of electronic grade precious metals
Metal components are treated at -196°C deep freeze
External Dimensions: W33.8 x H50.5 x D12cm
Weight: 18.3 Kg ±5% (Product weight varies by accessory.)