Isolation power block 抑振隔離電箱

MA-PB60A-5 NEW Basic Isolation power block

60A單相5路輸出隔離避震電箱
  • aa
  • bb
詳細介紹

讓MA靜神以成熟、高層次的隔離抑振電箱,匯聚電源能量之庫,展現全頻寬的分流性能

成功的電箱要件,不外乎擁有完整的設計、縝密的佈局、執行優質高效的能量分配,並快速釋放電位差,讓電能以充沛且快速的電路前進。MA靜神一直追求著自我的極限,旗下隔離抑振電箱經歷了數代的演進,採以最完善、完整的線路佈局,加上精良且特殊的零組件,將入戶電能作第一次的醇化處理。

MA靜神的隔離抑振電箱,內外部件全都採用訂製組件,箱體採用厚鐵鍍鋅、並覆以特殊高溫烤漆處理,給予隔磁、抑振、穩固的基石,內部斷路器採用台灣大廠的「客製」無熔絲閘,從外觀看來與一般市售相仿,常被質疑為何不用國外知名的品牌,但這樣的崇洋心結,不僅看低台廠,也完全低估了MA靜神的嚴苛標準;與我們合作的台廠,其技術與性能都可依需求要求、且支援度高,再複雜的工序都能幫忙搞定,並強化高規結構製程封裝,如無熔絲的核心介電,在持續不斷的大電流經過絕緣材時,能夠完全隔絕電磁輻射與弱電的干擾,確保高介電值、耐大電流電壓的高效性能,完整傳輸極大化的電能頻寬,這些都是現成市售品所無法相比的。MA靜神歷經長時間的開發研究,專注於精確的音響電源這領域,將別人做不到的極寬頻,透過「MA靜神電源系統」重新展現,這是市面上常見的拼裝電源所到達不了的,而MA靜神堅持關鍵的每個環節都不能錯放,最終才能擁有豐潤、飽滿、充沛、純淨的寬頻電能。此外,L相(火線)、N相(水線)的分閘不用一般傳統的電源線,採用特別訂製的高階銅板,經CNC切型後、處以細緻打磨,最後鍍上電子級貴金屬,保持最佳的金屬物理條件,其耐高電壓、高電流、高速傳導的特性,與半永久性的穩定條件,展現出極為優異的電源傳輸性能,表現出不凡的全方位導電能力。

而同樣工法也用在G相(地線)上,搭配上PG-16接地匯流排,讓電位差能更加快速的釋放。箱內更為了隔離與抑振,特別加上金屬隔離板與增加強化結構點,讓全頻寬電源在安定穩固的機箱內流暢地分流出去,任何會影響電源品質的小細節都不放過;玩家還能選購MA靜神的「Basic MKⅡ or Studio MKⅡ 超級接地器」、「M-460 複合地迴接地板」,更能讓接地的性能翻倍躍進,這同時也是淨化電源的重要核心之一,我們強烈建議「進入室電的第一步」千萬不容小覷,別讓拼裝車在一開始就虛化了電源能量,選擇MA靜神電源系統,將是您翻轉平凡電源的第一步,極致音響電源的無限可能從此開始。


MA 靜神 mature and high-level isolation and damping electrical box gathers energy from the power source and demonstrates full bandwidth performance in power distribution.

The key elements of a successful electrical box are complete design, meticulous layout, high-quality and efficient energy distribution, and quick release of potential difference, allowing electrical energy to advance through circuits abundantly and quickly. MA 靜神 has always pushed the limits and evolved its isolation and damping electrical box through multiple generations. It adopts the most complete circuit layout and high-quality and special components to treat incoming power for the first time.

MA 靜神 isolation and damping electrical box uses custom components for both internal and external parts. The box body is made of thick galvanized steel and coated with special high-temperature paint, providing a foundation for isolation, damping, and stability. The internal breaker uses a customized fuseless gate from a major Taiwan manufacturer, which looks similar to those sold in the general market but is often questioned why it does not use well-known foreign brands. However, such foreign obsession not only looks down on Taiwanese manufacturers but also underestimates MA 靜神 stringent standards. The Taiwanese manufacturer we work with can meet our technical and performance requirements, and provides high support. They can handle even the most complex processes and strengthen high-quality structural packaging processes, such as the core dielectric without fuses. When subjected to continuous high current passing through insulating materials, it can completely isolate electromagnetic radiation and weak electrical interference, ensuring efficient performance with high dielectric values and large current voltage resistance, maximizing the transmission of electrical energy bandwidth, which cannot be compared with off-the-shelf products. After long-term development and research, MA 靜神 focuses on precise audio power in this field. Through the "MA 靜神 Power System," it re-demonstrates the ultra-wide bandwidth that others cannot achieve. MA 靜神 insists that every critical link cannot be misplaced, and only then can it possess rich, full, abundant, and pure wide-band electrical energy. In addition, the L-phase (hot line) and N-phase (neutral line) are not separated by traditional power lines. Instead, it uses specially customized high-end copper plates, which are CNC cut and finely polished, and finally plated with electronic-grade precious metals to maintain the best metal physical conditions. Its high voltage resistance, high current, and high-speed conduction characteristics, as well as its semi-permanent stable conditions, demonstrate excellent power transmission performance, showing extraordinary all-round conductivity.

The same technique is also used on the ground (G) line, combined with the PG-16 grounding bus, allowing the potential difference to be released more quickly. Inside the box, metal isolation plates and reinforced structural points are specially added for isolation and damping, allowing the full-bandwidth power to flow smoothly and stably in the stable chassis, leaving no detail that may affect the power quality unchecked. Players can also choose MA 靜神 "Basic MK II or Studio MK II Super Grounding Device" and "M-460 Composite Ground Looping Board" to double the grounding performance. This is also one of the important cores of purifying the power supply. We strongly recommend that you not underestimate the "first step in room electricity". Don't let the assembled car dissipate the power energy from the beginning. Choosing the MA 靜神 power system will be your first step in overturning ordinary power supply, and the infinite possibilities of ultimate audio power supply begin from here.

MA-PB60A-5 NEW Basic Isolation power block 60A單相5路輸出隔離避震電箱
  • 60A單相隔離電源模組、5路輸出(4路20A、1路30A)
  • 穩固且防震的電箱結構設計
  • 優質厚導電銅板,並處以精緻拋光
  • -196°C深冷處理
  • 機箱採用特殊高品質電鍍處理
  • 外部尺寸:W33.8 x H50.5 x D12cm
  • 重量:約 18.3 kg±5%
This is a 60A single-phase isolation power module with 5 outputs (4 x 20A, 1 x 30A). The power module is housed in a sturdy and shock-resistant box designed with high-quality thick conductive copper plates that have been finely polished and treated with -196°C cryogenic processing. The box is also treated with a special high-quality electroplating process. 
External Dimensions: W33.8 x H50.5 x D12cm
Weight: 18.3 Kg ±5% (Product weight varies by accessory.)