再現豐富的線條之美，延展出更恢弘的音場
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
為了達成快速消除環境諧震的影響，器材與檯面之間必定有一個連結，而這個連結的墊面體，就是影響聲音細節的關鍵，若是沒有小心處理，就可能會在環境的共鳴諧震下，不斷地交互作用，導致微抖動不斷地霧化了原有的音頻，進一步來說，就是會弱化音樂的聚焦能力、紋理、音場景深等等……，最終導致音樂無法釋放出原有的活生感，導致聲音越聽越發煩躁。我們覺得玩音響、聽音樂，最重要就是要聽起來是舒服的、愉快的，而不是刺激、生硬、了無生氣。我們發現貼在地上、架上的「腳」很重要，一般音響原廠只會做到四平八穩、不衰聲為標準，而不太會注意到「腳」是否有做好。若是遇上標準要求低的「肉腳」，就可以預期到發出來的聲音，應該就會是虛軟無力、混糊不明，而會發出這樣聲音，不全是音響本身的問題，也許是供電的「電源不夠純淨」或是「腳」沒站好了。
旗下這款MA-3214就是專為落地型揚聲器、重型後級、AV環繞擴大機等……這類中大型器材所設計，採用雙層複合設計，內層採用高剛性碳鋼削銑，外圍則以整塊的複合金鋁，慢速削銑成型，更特別在側面與底部削出數道淺溝，只為求獲得更好的諧振消散效率，再經過多道細緻打磨後，最後在處以最後一道表面強化的陽極處理。這款MA-3214腳墊主要是針對一些份量較重、較容易產生諧振的中大型器材來使用，如落地型揚聲器、重型後級、AV環繞擴大機等等……，同時也推出相搭配的「MA-3227」角錐，可同時搭配使用效果更佳相乘。玩家在使用這類腳釘墊時，將會發現聲音會立刻變得鮮活生動，音場與細節立刻開展出來，而在片刻之後，裝載時的接觸點瞬間應力消除後，聲音表現將會更進一步的提升。
MA靜神的解決方案便是從釘墊來下手，強化設備釘腳的穩定度，因此我們選擇最適抑振的合金材料，選定了內含不同比例的鋁、銅、鎂等多種金屬的合金材料，經過多道聲學處理工序，再加上表面熱處理優化，便能將表層硬度提升至異常堅硬，甚至比地面水泥硬上數百至千倍，最終達成高效全頻段的制振能力，以優勢抑振、導振效能來消弭微振，幫助音響達成最佳性能表現。最終，在如此超優質穩定的條件下，音質、音色、音場將獲得全面性的提升躍進，低頻將能更加潛沉直接且明朗，不再拖泥帶水，中高頻自然流暢地延伸，改善微信號的細節表現，器樂形體猶如眼前，和諧之音相輔相融，活化了整體系統的聲音表現，音樂裡的細節、舞台景深、聲紋質地，自然地填滿音響室裡的空間，沒有誇張的頻響變化，也沒有刻意營造凹凸強化風格，有的只是找回音樂中失去的微動態，與自然延展的樂音餘韻，這些優勢都將勝過未經處理前的千百倍。在MA靜神充分的能量供給下，大幅提升聆聽音樂時的感動，讓您猶如找回年輕時的亢奮活力，舒適自在地享受頂級的音樂音響饗宴。別懷疑！跨進Hi-Fi美聲的臨門一腳，就差這一「墊」！
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
有效抑制器材微振，提升聲音的細節密度，讓音樂形體更加清晰凝聚。
建議用於落地型揚聲器、重型後級、AV環繞擴大機……
尺寸：約32×14mm (Φ×H)
重量：約41.0g/顆
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MA-3214 Isolation Base / Damper Cushion
Reveal the full texture of music. Expand your soundstage with authority.
Every audio system stands on its feet—but how it stands defines how it sounds.
The MA-3214 Isolation Base is meticulously engineered to address the weakest link between your equipment and the supporting surface: the contact point where resonance is born, transferred, and amplified. Left untreated, these micro-vibrations subtly but relentlessly degrade sonic clarity—smearing textures, dulling transients, and collapsing the three-dimensional space that music demands to fully express itself.
With the MA-3214, Monitor Acoustics offers a superior solution:
- A dual-layer hybrid construction, combining a carbon steel core with an outer ring of precision-milled multi-metal aluminum alloy
- Strategic groove patterning on the base and sides to improve vibrational dissipation
- Finished with a multi-stage surface treatment including anodization for maximum hardness and durability
This model is purpose-built for heavyweight, vibration-prone gear—floorstanding loudspeakers, power amplifiers, AV receivers, and more. When paired with the MA-3227 spike base, it delivers exponentially enhanced performance, tackling both vertical and lateral resonance simultaneously.
Install the MA-3214 under your components and you’ll immediately hear a more open, lively, and expansive sound. Over time, as contact stress settles and mechanical coupling stabilizes, your system will begin to reveal new levels of depth, tonal balance, and low-frequency precision.
Engineered to Outperform
The secret lies in materials selection and treatment:
MA-3214 uses a custom alloy blend containing aluminum, copper, and magnesium—metals chosen for their damping synergy. This alloy is then slow-cut and heat-treated, achieving surface hardness far beyond concrete, allowing for unmatched energy control across the full frequency spectrum.
The result is not an artificial tuning, but a restoration of musical purity:
- Deep, tight, articulate bass
- Smooth and natural mid-to-high extension
- Improved clarity in fine textures and stage layering
- Enhanced realism and immersion—as if the performers appeared before you
In short, MA-3214 doesn't color your system; it simply removes what shouldn't be there, allowing your equipment to sound as it was meant to.
Sometimes, the difference between good sound and great sound is only a few millimeters of carefully crafted precision.
FEATURES
- High-damping isolation base designed for heavyweight audio components
- Dual-material hybrid structure with carbon steel core and alloy shell
- Precision-milled grooves for enhanced vibrational diffusion
- Anodized surface for structural reinforcement
- Synergizes with MA-3227 spike base for complete resonance control
- Recommended for floorstanding speakers, large power amps, AV receivers
- Size: approx. 32 × 14mm (Φ × H)
- Weight: approx. 41.0g each