諧振微震一併退散、凝聚出音樂的完整原貌
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
為了達成快速消除環境諧震的影響，器材與檯面之間必定有一個連結，而這個連結的墊面體，就是影響聲音細節的關鍵，若是沒有小心處理，就可能會在環境的共鳴諧震下，不斷地交互作用，導致微抖動不斷地霧化了原有的音頻，進一步來說，就是會弱化音樂的聚焦能力、紋理、音場景深等等……，最終導致音樂無法釋放出原有的活生感，導致聲音越聽越發煩躁。玩音響、聽音樂，最重要就是要聽起來是舒服的、愉快的，而不是刺激、生硬，或是了無生氣。我們發現貼在地上、架上的「腳」很重要，一般原廠音響只會做到四平八穩、不衰聲視為及格標準，不太會在乎「腳」是否有做好。若是遇上標準要求低的「肉腳」，就可以預期到發出來的聲音，應該就會是虛軟無力、混糊不明，而會發出這樣聲音，不全是音響本身的問題，也許是供電的「電源不夠純淨」或是「腳」沒站好了。
我們知道這個狀況，針對書架型揚聲器、前級、DAC、轉盤、綜擴……等中小型設備，推出MA-3512B腳墊，結構中心採用高剛性碳鋼材質，外圈則是以複合金鋁削銑成型，並在側面與底部削出多道淺溝，讓諧振消散更加有效率，接著經過多道細緻打磨後，最後在處以一道表面強化的陽極處理。淺凹槽設計的MA-3512B，主要針對輕量級器材做使用，搭配對應的「MA-3512A」角錐，儘量將重心放低、將諧振導散，讓聲音拓展開來，重拾音樂裡的細節，高低頻段同時向兩端更加延伸開來，如此就能聽見更寬鬆自在的舒適之音。玩家在使用這類腳釘墊時，將會發現聲音會立刻變得鮮活生動，音場與細節立刻開展出來，而在片刻之後，裝載時的接觸點瞬間應力消除後，聲音表現將會更進一步的提升。
MA靜神的解決方案便是從釘墊來下手，強化設備釘腳的穩定度，因此我們選擇最適抑振的合金材料，選定了內含不同比例的鋁、銅、鎂等多種金屬的合金材料，經過多道聲學處理工序，再加上表面熱處理優化，便能將表層硬度提升至異常堅硬，甚至比地面水泥硬上數百至千倍，最終達成高效全頻段的制振能力，以優勢抑振、導振效能來消弭微振，幫助音響達成最佳性能表現。最終，在如此超優質穩定的條件下，音質、音色、音場將獲得全面性的提升躍進，低頻將能更加潛沉直接且明朗，不再拖泥帶水，中高頻自然流暢地延伸，改善微信號的細節表現，器樂形體猶如眼前，和諧之音相輔相融，活化了整體系統的聲音表現，音樂裡的細節、舞台景深、聲紋質地，自然地填滿音響室裡的空間，沒有誇張的頻響變化，也沒有刻意營造凹凸強化風格，有的只是找回音樂中失去的微動態，與自然延展的樂音餘韻，這些優勢都將勝過未經處理前的千百倍。在MA靜神充分的能量供給下，大幅提升聆聽音樂時的感動，讓您猶如找回年輕時的亢奮活力，舒適自在地享受頂級的音樂音響饗宴。別懷疑！跨進Hi-Fi美聲的臨門一腳，就差這一「墊」！
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
有效抑制器材微振，提升聲音的細節密度，讓音樂形體更加清晰凝聚。
建議用於書架型揚聲器、前級、DAC、轉盤、綜擴……
尺寸：約32×12mm (Φ×H)
重量：約34.9g/顆
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MA-3512B Isolation Base / Damper Cushion
Suppress unwanted vibrations. Reveal music’s purest form.
To achieve the fastest elimination of environmental micro-resonance, there must be an effective connection between your audio equipment and its surface. This connection—the isolation base—plays a pivotal role in shaping sound clarity and detail. If not handled properly, the interaction between the surface and equipment can amplify subtle vibrations, smearing audio details, weakening focus, and diminishing the depth of the soundstage.
The result? A lack of musical presence, leaving your listening experience increasingly fatiguing and unnatural.
At Monitor Acoustics, we understand that the feet of your equipment are just as crucial as the components themselves.
That’s why we developed the MA-3512B: an isolation base designed to work with lightweight audio components such as bookshelf speakers, preamps, DACs, CD players, and integrated amplifiers.
Key features of the MA-3512B include:
- High-rigidity carbon steel core for strong, stable contact with the surface
- Precision-machined aluminum alloy outer casing
- Shallow grooves along the sides and base to enhance vibration dissipation
- Multi-stage finishing and anodized surface hardening for durability and consistency
The result is a design that lowers the center of gravity of your equipment and improves resonance control, revealing music’s true details. When paired with the MA-3512A Spike Feet, the combination effectively broadens the soundstage, extends high and low frequencies, and presents a more relaxed, open listening experience.
Material Innovation for Superior Vibration Control
To ensure the best resonance damping performance, we use a specially formulated alloy containing aluminum, copper, and magnesium. Each piece undergoes a multi-step acoustic treatment, followed by thermal surface hardening, making it significantly harder than concrete—up to several hundred times more rigid. This gives the MA-3512B exceptional vibrational control, eliminating unwanted micro-vibrations that would otherwise degrade sound performance.
The improvements are clear:
- Deep bass becomes more controlled and direct
- Midrange and highs extend naturally, revealing previously hidden details
- Instrumental clarity and soundstage depth are sharply defined
- Micro-dynamics and musical texture are brought back to life with incredible accuracy
These changes don’t add coloration or exaggerate frequencies. Instead, they restore what’s naturally missing, giving you a more open, fluid listening experience without unnatural boosts or dips.
FEATURES
- Effectively suppresses micro-vibrations to enhance sonic detail
- Perfect for bookshelf speakers, preamps, DACs, CD players, integrated amps
- Dimensions: approx. 32 × 12mm (Φ × H)
- Weight: approx. 34.9g each