進化無極限，展現平坦無瑕的極寬頻電能
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
曾經以為「Studio Pro Version. 5.6」已是無法超越的高牆了，但是在最新的科技材料上又看見超越的曙光，因此再次重新設計佈局架構，只為了不斷超越，「Evolution Version. 5.6」因此誕生。
為了再次超越過往門檻，除了技術的提升，材料也是關鍵的一環，就像幾年前稀有、效率高的新材料，到了今天可能已是隨手可得、滿街都是，科技不斷創新，我們也不能落人之後，只要材料商有更好、效率更高的產品推出，我們必定會嘗試設計，進化產品線陣容。這回，在Evolution Version. 5.6內部核心的關鍵元件，有了突破性的改進，排雜效率更高、淨電特性更好、防護能力更佳，雖然外觀看起來與過去相去不遠，但重要的核心已經不同過往，用上最新高效率的元件，利用電磁迴控制原理，有效地降低噪訊干擾，同時拓展頻率的延伸，其最大衰減值達-60db，因此內阻就能在最佳狀態下，讓水火線的溫度不會上升、甚至下降，因此就能獲得更強大的電流能量，同時讓電源效率能有大幅度的提升，透過這個接地器裡的全頻寬的核心被動元件，將無效的磁迴重新等化處理，將有效的頻率重新再生，不會產生任何負面效應，也不會改變您對聲音高標準的要求，重現寧靜安定的電源環境，讓電氣設備發揮應有的穩定實力。而且這回也將核心周邊的元件、線材、端子作了調整與升級，佈局方式也重新調配，更換成最符合好聲的材料，此外，金屬外殼也改採新一代的特殊金屬殼，比重與過去不同，更加有利於隔離抑振，我們把每個環節都注意到了，確認性能表現完全超越過去，才能正式定版、投注量產。
用家不用擔心會不會很難安裝的問題，只需要超級接地器固定在電箱旁的RC牆上，再將電箱裡原始建築的「地迴路接地線」接上超級接地器的「OUT端」上，接著從「IN端」利用MA附贈的接地專用線，接回至電箱的「接地匯流排」上即可。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
衰減值：-60DB Max
耐電流值：20A
響應頻率：Fo～30Mhz
外型尺寸：310×125×83mm（W×D×H/含腳墊）
重量：約 3.5 kg ±5%
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
Evolution Version 5.6 Super Ground Filter (For Power Block Ground Filter)
Unleash Infinite Evolution. Experience Flawless, Ultra-Wideband Power.
What was once considered the pinnacle—Studio Pro Version 5.6—has now been surpassed. Thanks to the latest advancements in materials and layout design, we've reimagined the core of ground filtering, giving rise to the all-new Evolution Version 5.6.
To break through previous performance ceilings, we didn’t just tweak the design—we upgraded the heart of the system. As cutting-edge components and materials become available, we continuously evolve our product line. The Evolution 5.6 incorporates newly developed high-efficiency components and a restructured electromagnetic loop control system to dramatically reduce noise, broaden frequency response, and deliver superior power integrity.
Though the exterior retains its clean and compact form, the internal architecture is a complete overhaul. The system now achieves up to -60 dB attenuation, ensuring minimal interference across a wide frequency range from F₀ to 30 MHz. Low internal resistance helps maintain stable line temperatures—even under heavy load—boosting current capacity and enhancing overall power delivery.
The passive wideband core eliminates unwanted magnetic loop artifacts and regenerates usable frequencies without introducing negative effects. It preserves tonal accuracy and dynamic range, allowing your audio system to perform at its highest potential—quiet, stable, and resolute.
We’ve also upgraded every supporting component: the internal wiring, terminals, and metal chassis are now crafted from materials chosen for both sonic neutrality and mechanical damping. A new-generation metal enclosure, with optimized weight and structure, enhances shielding and vibration suppression.
Effortless Installation
Installing the Evolution Version 5.6 is simple. Mount the unit on an RC wall near your power distribution panel. Connect the building’s original ground loop wire to the OUT terminal, then use the supplied MA ground cable to link the IN terminal back to the panel’s grounding busbar. That’s it—you're now grounded through a high-performance, ultra-low-noise filter.
FEATURES
- Attenuation: Up to -60 dB
- Current Capacity: 20A
- Frequency Response: F₀ ~ 30 MHz
- Dimensions: 310 × 125 × 83 mm (W × D × H, incl. footpads)
- Weight: Approx. 3.5 kg ±5%