小黑線靠邊閃，換上這條能相輔加成的優聲線
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
現在聽音樂、玩音響的人已經越來越聰明，市場上對於電源品質的重視度也不同以往，為求端正充沛的純淨電源，能做得更好、絕不會忽視放過，所以我們為較少見的IEC C19電源連接埠，開發出MA-1200 20A隔離屏蔽電源線，這類的電源線基本上都是較高階的後級音響才會使用，例如英國銘廠Chord Electronics，旗下的高階後級都是採用IEC C19/C20連接器，不過，許多廠商對於音響的配件，大多只為符合安全規範，能否徹底激化音響性能，就要看用家如何去調整了，這時就需要一條好一點的電源線，把整個聲音提升上來。
MA-1200是一款針對C19 20A需求的音響級電源線，導線使用新一代高精銅導線，單芯線徑達2.54mm2，導線外介電批覆採用多層隔離塑料，穩定電源傳送效率，並在最外層覆上隔離編織網作為保護之用。另外，我們為了製作這一系列的C19 20A電源線，設計了一款專屬的電源公頭，選用高規紅導銅作為導件，其硬度適中、耐插拔，導件以超慢速細緻打磨處理、鍍上電子級高純金，強化導件表面強度與電源傳輸速度，最後再以-196°C超低溫處理。此外，選用高強度、耐溫差且抑振的介電核心與外殼作為介電防護，更在三相之間設計了特殊的導磁結構，讓三相電不致相互干擾，如此更能確保電源能夠無染地純淨直通，加上穩固方形入線結構設計，將阻抗降至最低，保持最佳的傳輸條件。介電核心則是採用與ACE系列相同的複合介電塑料，裡頭配方添加多種奈米粉末，讓介電隔離性能倍增，配上高強度、耐溫差的抑振聚碳酸酯外殼，讓隔離、防護、抑振面面俱到，外殼尾端還設計散磁裝置，跨架在兩顆固線螺絲上，作為消散磁迴干擾之用，確保內部電源不受外界侵擾，保持電能能快速無擾的傳遞，讓器材一上電就是端正無瑕、充沛純淨的優質電源，讓聆聽者聽見最完美的聲音。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
線身採用單芯線徑達2.54mm2的高純度銅導線與高介電隔離塑材
專為MA-1200設計專用電源頭，採用與ACE系列相同核心，
配上高規紅導銅、超慢速細緻打磨、鍍電子級高純金處理
特殊的方形銅固線裝置，與獨特的消散磁迴裝置
耐壓：600v/20A
長度：約1.8m
重量：約510g
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MA-1200 IEC 20A Finish AC Power Cable (NEMA Type)
Ditch the Generic Cable—Upgrade to a Power Cable that Elevates Your Sound
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
Audiophiles today are more discerning than ever—demanding not only exceptional equipment, but also superior power delivery. For high-performance systems using the rarer IEC C19 inlet, the MA-1200 provides an ideal solution: a fully shielded, high-purity 20A audio-grade power cable that strikes the perfect balance between efficiency, purity, and affordability.
Just like its bigger sibling, the MA-2200, the MA-1200 was purpose-built to unleash the full potential of high-end power amplifiers—such as those from Chord Electronics—without letting the power cable become the weak link. While many cables in this category meet basic electrical standards, MA-1200 was designed from the ground up to do more: to enhance performance and preserve sonic integrity.
At its core, the MA-1200 features a single-core 2.54 mm² high-purity copper conductor, wrapped in multiple layers of dielectric insulation and finished with a braided shielding layer that protects against noise and external interference. This ensures a stable, interference-free path for clean power delivery.
The plug is a custom-built NEMA design developed specifically for the MA-1200 series, incorporating a core structure shared with our higher-tier ACE series. It features high-grade red copper contacts, meticulously slow-polished and plated with electronic-grade high-purity gold, followed by a -196°C cryogenic treatment to enhance contact stability and electrical performance.
Internally, the plug includes a multi-phase magnetic structure that minimizes crosstalk between conductors and ensures precise current delivery. The dielectric materials are formulated with nano-enhanced polymer compounds, maximizing electrical isolation and minimizing resonance. A high-durability polycarbonate outer shell adds mechanical stability and heat resistance, while the rear termination includes a magnetic dispersion system across the twin strain relief screws—shielding the internal circuitry from magnetic loop interference.
Compact yet robust, the MA-1200 brings immediate sonic benefits to any component it powers—delivering a foundation of clean, uncolored energy that allows your system to perform with composure, control, and tonal balance.
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES
- Conductor: 2.54 mm² high-purity copper, solid-core
- Multi-layer shielding with dielectric polymers and braided outer mesh
- Custom-built NEMA plug for MA-1200, using the same internal structure as ACE series
- Contacts made of high-spec red copper, ultra-slow polished and gold plated, cryogenically treated
- Features square copper clamp terminals and a magnetic dispersion system
- Rated: 600V / 20A
- Length: approx. 1.8 meters
- Weight: approx. 510 g
⚠️ The MA-1200 is ideal for high-current components requiring IEC C19 input. For users needing even higher conductor mass and shielding, consider upgrading to the MA-2200.
