MaQ-1060-BNC Copper 75ohm Interconnector Line cable
突破BNC的傳輸臨界速率，滿足高端Hi-End音響用家
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
而最新開發的這款MaQ-1060-BNC 75ohm同軸數位線，動心起念始於目前頂尖的音響品牌（ Chord、dcs、Gryphon、MSB、Audio Research、Linn、Esoteric、naim 等… ），在數位傳輸這塊也多備有BNC來做接駁，因為BNC在結構上比RCA要穩固許多，也是專業錄音室設備的標準數位端子之一。
在開發這款MaQ-1060-BNC之初，我們測試了許多廠牌的端子頭，最後選用專業錄音室愛用的NEUTRIK端子頭，再以MA靜神繁複的高端製程二次加工，將端子頭拆解、把金屬件重新以超級奈米研磨工序、超高週波深淨處理，後分作兩種規範型號：「無電鍍處理」與採用「電子級電鍍銀」兩種規範，分以型號「Copper」與「Silver」來區分，簡單來分辨外觀上的差異，就是在中心端的端子針，顏色分別為銅金與亮銀。
導線採自行生產達1.06mm的6N OCC單芯線，生產時以極慢速無應力退火處理，來獲得高品質、高純度的核心關鍵材，就如同論壇文章內介紹「一般BNC同軸直徑都在1mm以下，Hi End廠商出品的發燒BNC大概在1.02mm上下；而1060的1.06mm基本上已經是極限。」，我們不斷嘗試找出最佳的聲音表現方案，最終定下1.06mm這個最佳徑寬，這個線徑是BNC至頂的高效條件，多數的線材廠只想節省成本，採用標準（或更低）線徑生產，如此並無法展現完美線性，我們不想妥協、並堅持完美，所以選定最高標規範，並選搭最適合的介電材質。
MaQ-1060-BNC的首道介電防護採用「日本大金廠」生產的優質PFA（鐵氟龍），其特性有著極佳的絕緣介電值、耐化學性、耐高低溫，且幾乎不會老化，是極佳的介電材料，接著搭配上奈米石墨、無鹵素的XLPE、銅箔、金屬編織網、FEP鐵氟龍作為後段的多道抑振介電防護，兩段鐵氟龍介電、兩段金屬隔離，徹底安定訊號的傳輸，其中編織網更找來「法國製」的「銅鍍銀編織網」，我們為求最佳的訊號傳遞，不惜選購高性能材料，試著突破BNC的傳輸臨界速率，滿足高端Hi-End音響用家，我們更可依玩家需求訂製線身長度，用家不用擔心線長會影響訊號品質，因為對於有著極致高標準要求的我們，在民生展示中心的實驗音響室中，用最好的電源環境、頂尖的視聽音響設備、寂靜的聆聽空間，高標準化聆聽參考值，我們嘗試各種細微的變化參數，確認出最好的聲音，開發出高精確率、高效率、高表現率的產品，性能大幅超越名廠產品，MA靜神只想給玩家最真、最實的產品，讓用家一聽有感、再聽入魂。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
BNC端子：NEUTRIK BNC、加上MA後製加工
線材：導體採用 6N OCC、加上六道介電抑振保護層
線徑：6.5mm (Φ)
長度：1.2m ±3%（可接受長度訂製，所有工序製程比照正規線，價格計算以米/公尺(meter)為單位，每米加價請詢洽經銷商。）
重量：約120g ±3% (條)
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MaQ-1060-BNC Copper 75Ω Interconnect Cable
Pushing the boundaries of digital signal transmission—built for uncompromising Hi-End systems.
The MaQ-1060-BNC is Monitor Acoustics’ ultimate expression of digital coaxial engineering, tailored for the demands of elite audio systems and discerning audiophiles. Developed in response to the increasing adoption of BNC digital interfaces by reference-level brands like dCS, Chord, Gryphon, MSB, Audio Research, Esoteric, and Naim, this cable redefines what a true 75Ω BNC link should be—with exceptional precision, stability, and sonic transparency.
Pure Signal, No Compromise
At its core, the MaQ-1060-BNC Copper features a 1.06mm solid-core conductor made from ultra-high-purity 6N OCC copper, a diameter that reaches the physical and electrical limit of BNC architecture. Carefully produced under slow-draw annealing to eliminate internal stress, this conductor achieves unparalleled linearity and response across the full frequency spectrum. Most manufacturers settle for 1.0mm or less—Monitor Acoustics insists on the best.
Studio-Grade Connectors, Custom-Enhanced
To ensure absolute signal integrity, the cable is fitted with Neutrik professional BNC terminals, further enhanced in-house through an intricate multi-stage process:
- Disassembled and re-polished using nano-grade surface treatment
- Subjected to ultra-high-frequency deep cleansing
- Offered in two variants: the Copper version (unplated core pin) and Silver version (electron-grade silver-plated)
The MaQ-1060-BNC Copper features the natural copper-gold center pin, giving a smooth, organic tonal character prized by many analog-centric digital systems.
Six-Layer Dielectric & Vibration Damping
Beyond conductor purity, the MaQ-1060-BNC is shielded by a multi-material, multi-layer insulation system:
- Inner core: PFA (Teflon) dielectric by Daikin Japan—ultra-stable and non-aging
- Intermediate layers: Nano-graphite-infused XLPE, copper foil, French silver-plated copper mesh
- Final wrap: FEP outer Teflon for structural integrity and EMI shielding
This extensive shielding not only preserves signal clarity under extreme conditions but breaks through the theoretical transmission ceiling of BNC cables, delivering speed, texture, and emotional intensity.
Tested in the Real World, Tuned by Ear
Each MaQ-1060-BNC is developed and tested in Monitor Acoustics’ reference listening lab—an environment meticulously designed for low noise floor, optimal power conditions, and ultra-precise evaluation. Through countless trials, we achieved a cable that outperforms even established reference brands, delivering pure signal with heart and soul.
FEATURES
- Connector: Studio-grade Neutrik BNC with MA-enhanced machining and nano-treatment
- Conductor: 6N OCC copper, solid-core, 1.06mm diameter
- Insulation/Shielding: PFA + XLPE + copper foil + French silver-coated copper braid + FEP
- Cable Diameter: Approx. 6.5 mm (Φ)
- Length: Standard 1.2 m (±3%) – Custom lengths available upon request (priced per meter)
- Weight: Approx. 120g (±3%) per cable
MaQ-1060-BNC Copper isn't just another digital cable—it’s a statement of no-compromise engineering. Designed for high-end systems, built with rare materials, and tested under the most demanding conditions, it is made to deliver the purest digital signal, and to do so with emotional depth and technical brilliance.
