IG AG-P 1.5 GEN Isolation AC Receptacle 隔離電源插座 ( Analog)
小小改變、大大驚艷，每個進化都是為了電源的性能躍進
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
一般進口的壁插為何常被音響玩家所詬病，原因無它就是「對聲音、系統不滿」，而它只能負責過電之用，這個「點」若是質量差，過電的接觸面有限、電磁場就會混亂、電通分子量也會不流暢，電將無法順暢無阻的傳輸至末端，頻寬也將產生能量不足等……不良狀態。而音響專用電源壁插，因考究每個環節設計，包含「金屬接插件」的接觸點的強度、緊密度、面積，還有導體、電鍍、結構、抑振、介電、材質等……，周邊的配合，都是安定電流、接收全頻寬的要素。而要達到絶對隔離作用，就必須做到：「一、阻擋外來竄入的電磁干擾。二、讓導電性的獲得絕佳保障。三、瞬間電流爬升速度躍進。」，這些都是在解決音響系統衰聲中不可或缺的重中之重。而貴金屬電鍍作用在於保護導體穩定工作，提供音響級電能、表現出細膩顯實、全頻寬出奇效益的質量。而高密度彈性塑殼，同樣有著絕不可忽視的條件，優越的介電質、強度值、絕緣值等……，就算經年累月的使用，MA靜神都能保有二十年以上的完整性能使用期，良好的導體、結構、設計、製程，可預期的內阻將會極低，與極速的均溫性表現，這完整豐沛的全頻率能量，絕對不是一句「好」就可得。一般的家用插座礙於生產成本限制，塑料通常不會太講究，對於污磁完全沒有抵抗力、加上接插金屬接點小、阻抗高，容易產生升溫反應，而且銅質處理簡化、供電效率低，當然也不會有電鍍層保護，久了表面就容易產生氧化，造成二次阻抗升高，這也是一般家用插座需要十年一換的主因之一，更重的是這類插座出來的聲音，就是單薄、沒有力量，聲音質感粗糙、場面出不來，所以才會讓人詬病，明明器材、喇叭不差，聲音表現就是出不來，最後才發現原來是插座不及格。對於音響系統有著高標要求的玩家們，這立竿見影的巨大差異，就是最有意義的升級要件，長久以來追求的高密度音樂訊息量、全頻寬完整的極致電源，想要擁有就是這麼簡單。
我們在2011年開發出高性能的「AG-P (Analog) / AG-Q (Digital) 隔離電源插座」，直至今日這兩款插座，還是難以被超越，可說是MA靜神的傳奇，當年以極盡苛求的工藝，從外殼模具、金屬導材、打磨方式、電鍍配方、組裝步驟等等…都錙銖必較，特殊的鈹銅合金傳導核心，更採用少見繁工的五爪夾片設計，佐以細膩的打磨與貴金屬電鍍，其中還特別要求配合的電鍍廠，使用MA靜神指定的「精密電子級電鍍水」，不惜製作成本、也要把東西做到最好。
12年後，現代音響技術進展神速，所以我們為這兩款插座做了一點升級，稱之為「1.5 GEN」。為其做了三大方向的升級：一、施以緻優獨特電鍍工藝：挑選最高級別的電子級電鍍液，並為電鍍廠建構絕佳用電環境。二、接地絕緣再提升：將接地絕緣片的介電耐壓係數提升1000V、吸熱，聲音表現更佳純淨、安靜。三、入線孔調音柱加持：我們簡稱它Turning Tool(調音柱)，有效阻止導電板諧振、強化結構穩定，同時防止磁場外洩。其中，新舊電鍍的差異之大，先不論聆聽體驗，光就外觀用肉眼就能看出色澤度的不同，金屬光澤感更加耀眼，光面的細膩度更加豐潤。加上這次「1.5 GEN」同時修改了夾層絕緣板的絕緣係數，同時附贈了「入線孔調音柱」，用來填滿線徑空孔，讓插座中的電場凝聚、結構安定、電磁無染，實際在我們實驗室裡聆聽新舊版本，很明顯容易就能分辨出聲音差異，「1.5 GEN」版聲音更勁、更穩、更沉，聲音的更加豐澤淨美，超越了我們當初的預期，相信夾層絕緣板與線孔調音柱，也為「1.5 GEN」的好聲增添了幾分助力。讓玩家擁有高效能、高價值、高準確率、高標準的參考值，與絕佳的電醇化能量，這一直是我們努力的工作指標。經典再升級的「1.5 GEN」絕對讓你無從挑惕，以極為優異的性能，讓音響玩家用上了就「難以自拔」，我們對「靚電」細節要求面面俱到，才能將性能發揮至極致，更讓Hi-End音響無與倫比的性能展露無遺。
其中這款「AG-P 1.5 GEN」隔離式插座，是專為AV擴大機、管機、後級，或其他設備需求為大電流之器材所設計，核心導電材選用高純度、高導電係數、厚達0.8mm的鈹銅合金，並採用五爪接點設計，導體表面經過特殊的奈米研磨技術處理，並鍍上貴金屬銀、貴金屬鈀金，最後再處以-196°C超冷處理，讓金屬原子更加緊密連結，並消除金屬應力。隔離淨電模組以一組鍍上24K金的4N紅銅接地板，加上強化隔離絕緣的塑料配方，展現高穩定、無諧振、超靜低噪、均勻平衡、緊密插拔的高性能隔離電源插座，提供持續穩定且充沛的優越電能，將全頻寬的大電源能量，無損地延續至音響設備中，穩固地捕捉出音樂的紋理，就算在細微的弱音下，也能清晰明確地尋出音向，盡現音樂裡的情緒氛圍，MA靜神用心為「音響級」壁插座分級別類，只為將最美好的聲音，進入您的音響系統之中。隨盒配件附有電源專用螺絲與O型電源端子，還有六隻線孔調音柱，穩固電源磁場，讓電源直入音響，達成最完美的轉接站。
FEATURES 特點：
■ 核心導電材採用0.8mm厚的鈹銅合金，並鍍上貴金屬銀、鈀。
■ 核心導電材採用5pin接點設計，接駁緊密、無阻傳輸。
■ 接地板採用2mm厚的4N紅銅板，鍍上24K金。
■ 金屬導電材都經過多次細緻打磨。
■ 隔離絕緣板，上蓋採用120℃高耐溫尼龍材，底座採用PBT複合塑膠加上特殊纖維，接地板中間所用的夾層絕緣板耐電壓達3000V。
■ 採用臺灣頂級無磁、高強度不鏽鋼螺絲。
■ 金屬導材交由臺灣超冷科技處以12小時、-196°C的超冷處理。
■ 產品全為 Made in Taiwan 100% 台灣製造。
■ 尺寸：約34×93.5×30mm (W×H×D)
■ 重量：約100g
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
IG AG-P 1.5 GEN | Isolation AC Receptacle (Analog)
Small Upgrade. Big Difference. Every Evolution Brings a Leap in Power Performance.
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
Why are standard imported wall outlets often criticized by audio enthusiasts?
Simply put: they fall short on sonic performance. Conventional outlets are designed only to pass current — not to protect signal integrity. Poor contact surfaces, unstable magnetic fields, and inconsistent conductivity degrade energy transfer, leading to audible performance issues like reduced bandwidth, weak dynamics, and increased noise.
In contrast, audiophile-grade isolation outlets like the AG-P 1.5 GEN are precision-engineered from the ground up — from contact strength and conductivity to plating, damping, dielectric behavior, and material science — ensuring your power flows cleanly, quietly, and with full bandwidth fidelity.
To achieve true isolation performance, three key goals must be met:
- Block external electromagnetic interference
- Guarantee optimal conductivity and stable contact
- Support high-speed current rise and transient response
That’s what AG-P 1.5 GEN was built to deliver.
The Legacy, Evolved
In 2011, MA launched the original AG-P (Analog) and AG-Q (Digital) isolation-grade power receptacles — both regarded as landmark products for their extreme attention to materials, structure, plating, and assembly precision. From proprietary beryllium copper cores and 5-point contact jaws to in-house-developed Quantum-grade plating baths, these outlets set a new benchmark in performance and durability.
Fast forward 12 years, and we’ve elevated that legacy with the 1.5 GEN upgrade, refining the original with three crucial enhancements:
1. Enhanced Precision Plating
Now using the highest-grade electronic plating solution, paired with an optimized power environment for the plating process. The result: superior surface luster, improved conductivity, and visibly refined finish.
2. Upgraded Ground Insulation
The dielectric strength of the grounding insulation sheet has been boosted by 1000V, reducing noise and improving tonal purity and dynamic stillness.
3. Integrated Turning Tools (Tuning Pillars)
Included tuning pillars fill the wiring gaps at the entry points, stabilizing the internal structure, minimizing vibration, and creating a concentrated, interference-free electric field.
The difference isn’t just audible — it’s visible. The new version shows a richer metallic sheen and smoother finish. In lab tests and listening sessions, the 1.5 GEN delivers a tighter, weightier, more refined sound, exceeding even our original expectations.
Built for High-Current Analog Gear
The AG-P 1.5 GEN is purpose-built for high-current applications such as AV amplifiers, tube amps, power amps, and more. At its heart lies a 0.8mm thick beryllium copper alloy core, with a 5-jaw contact system to ensure a firm grip and uncompromised conductivity. The contact surfaces are nano-polished and plated with precious silver and palladium, then cryogenically treated at -196°C for 12 hours to enhance molecular structure and reduce internal stress.
A 2mm thick 4N red copper grounding plate, plated with 24K gold, anchors the isolation module, while the reinforced insulator stack achieves a 3000V dielectric strength for unwavering thermal and magnetic stability.
From pure materials to meticulous assembly — and cryogenic refinement to vibration control — this is a true audiophile receptacle. With over 20 years of expected performance life and unmistakable sound gains, it’s the perfect upgrade for systems where power delivery is critical to musical expression.
Included in every box:
- High-grade stainless steel screws
- O-type terminal lugs
- Six tuning pillars for entry-point damping
The AG-P 1.5 GEN is your ultimate transition point between raw current and musical soul.
FEATURES
- 0.8mm thick beryllium copper alloy conductors, plated with precious silver and palladium
- Proprietary 5-point clamping contact system ensures ultra-tight signal flow
- 2mm thick 4N red copper ground plate, plated with 24K gold
- Multi-stage precision surface polishing and plating
- High-temp nylon top shell (120°C), reinforced PBT composite base with specialty fiber
- Mid-layer insulation rated at 3000V dielectric strength
- High-strength, non-magnetic Taiwan-made stainless steel screws
- Cryogenically treated at -196°C for 12 hours by Taiwan ColdTech
- 100% Made in Taiwan
- Dimensions: approx. 34 × 93.5 × 30 mm (W × H × D)
- Weight: approx. 100g