核心升級、性能跳級，選對用對、讓聲音飛躍前進
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
由於一代的Tai-Chi-A成功打開了一片DIY的市場，讓二代的升級要如何進行著實傷透了腦筋，已經真摯完美的Tai-Chi-A，到底要怎麼再提升呢？這個問題到了Tai-Chi-A即將完售的現在，已經是迫在眉梢，為了讓DIY的玩家們有耳目一新的感覺，我們嘗試著將高階核心下放，透過特性的組合搭配，調和出新一代的NEW Tai-Chi-A，最終，我們挑選出Signature Red的核心，搭配新一代的Tai-Chi-A塑殼，讓看似一般與過去沒兩樣的外殼，有著不凡的內涵。
雖說是新一代的Tai-Chi-A M3/F3 RC，不過新一代Tai-Chi-A M3/F3 RC 裡裡外外已不同過去。核心採用旗艦Signature Red相同架構，黑色導電核心依循Signature Red配置，公頭採用訂製紅導精銅、經過超慢速奈米研磨、電子級鍍金＋鍍銠，最後再以-196°C超低溫處理，而採用高導合金銅的母頭也是同樣的製程，差別在於母頭導件在電鍍上多了一層奈米銅，所以Tai-Chi-A M3/F3 RC 可謂是以旗艦為本的超性能公母頭。三相導件之間同時保留了特殊導磁結構設計，讓三相電能不致相互干擾，確保電源能夠無染地純淨直通傳導，加上穩固方形入線結構設計，將阻抗降至最低，保持最佳的傳輸條件，一切的細節都不錯放。
新版外殼看起來雖然與上一代差異不大，不過，實際上塑料規格、製程規範、添加的奈米微量元素種類，都有些微的修改，成分、溫度、壓力都是實驗測試多時的最佳成果，完全不同於前一代。此外，在L(火)、N(水)、G(地)端間以獨有的導磁铜片，利用導磁铜片將核心內空間的浮動磁場引導至地迴釋放，這項淨化浮動磁場至地迴的技術，更能夠持續不間斷地消除殆盡污磁，讓L(火)、N(水)、G(地)線電專注其職、互不干擾，導通出最純淨無瑕的電能，以更進一步確保內部電源不受外界侵擾，保持電能能夠快速直通且無干擾的傳遞。
「Monitor Acoustics 靜神」始終堅持著產品一定要台灣製作，所以我們「從頭開始」從結構的發想、電路的設計、材料的選用，一切全都是親力親為、不假手於外人。這些外人看似平常的電源配件，其實隱含著我們許多職人們的工藝細節在裡頭，我們用盡心力將產品做到最好，相信在用家使用過後，也能體認到我們背後的努力與用心，我們堅信產品要符合好聲的標準、效率要高、品質要好，所有細節都不能錯放，因此「Tai-Chi-A M3/F3 RC」就這樣誕生了。
音響玩家對於聲音表現的音頻進化，總是永無止境，在原廠標準化的生產製品下，審核標準不夠高，就容易造成弱音的缺口，為了補足這一塊的不足，我們推出了一系列高端且高效能的電源公母頭DIY套件，提供給喜愛自己動手做的玩家，依照心目中的聲音標準來製作「對的」電源導線。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
公頭 male: L/N/G 訂製紅導銅、電子級鍍金＋鍍銠
母頭 female: L/N/G 訂製高導銅、電子級鍍銅＋鍍金＋鍍銠
導件：超慢速細緻打磨、獨特導磁合金結構、-196°C超低溫處理、導磁消磁技術
塑料：Signature Red 複合奈米介電核心、高強度耐溫差 Tai-Chi 抑振聚碳酸酯
入線直徑範圍：10～19mm (Φ)
尺寸：公頭-約38×77mm (Φ×H) / 母頭-約38×79.5mm (Φ×H)
重量：公頭-約60g / 母頭-約70g
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
Monitor Acoustics Tai-Chi-A M3/F3 RC
Core Upgrade. Performance Leap. Choose Right, Hear Beyond.
The original Tai-Chi-A connectors won the hearts of countless DIY audiophiles, quickly becoming a go-to choice for power cable builds. But with such a well-balanced first generation, improving upon it was no easy task. When the last of the original units approached sell-out, we knew it was time to go back to the drawing board—not to simply iterate, but to elevate.
With the Tai-Chi-A M3/F3 RC NEW, we infused flagship-grade technology into a familiar form. At its heart lies the Signature Red core, now adapted for Tai-Chi users. While the exterior may seem unchanged, the inner engineering is anything but. This next-gen model borrows heavily from our premium lines, with redesigned materials, upgraded processing, and re-tuned performance.
Flagship Core. Reinvented Shell.
The male connector (M3 RC) features custom red copper blades, ultra-slow nano-polished, and multi-layered with electronic-grade gold and rhodium plating, then deep cryo-treated at -196°C. The female connector (F3 RC) utilizes high-conductivity copper blades with an additional nano-copper underlayer beneath the same premium plating stack. Both ends adopt the structural layout of the Signature Red, including a magnetically isolated three-phase configuration to prevent mutual interference between L/N/G poles—ensuring uncolored, direct energy transfer.
To further reduce resistance and vibration, we refined the clamping mechanism with a stabilized rectangular wire entry structure, minimizing contact loss while improving current flow consistency.
Enhanced Shell. Hidden Engineering.
Though it looks similar to its predecessor, the NEW Tai-Chi shell features a rebalanced nano-composite polymer, revised molding temperatures, and pressure-calibrated tooling. The outer material retains the recognizable Tai-Chi form factor but performs at a new level of thermal endurance and dielectric purity.
We also added a unique magnetic-field purification system: between the L (live), N (neutral), and G (ground) terminals, specially designed magnetic copper strips redirect internal stray magnetic fields to the grounding path. This continuous dissipation of noise fields ensures each conductor operates independently—purely and interference-free.
Made in Taiwan. Made by Passion.
At Monitor Acoustics, we insist on full in-house production in Taiwan. Every connector is built from the ground up—no OEM shortcuts, no off-the-shelf solutions. From structural design to material selection and hand-finishing, every detail reflects the craftsmanship of dedicated professionals who are obsessed with delivering better sound.
We designed the Tai-Chi-A M3/F3 RC NEW not just as a product, but as an invitation for DIYers to push their own limits—equipping you with professional-grade performance and control to build power cables that meet your own sonic ideals.
FEATURES
-
Male Connector (M3 RC): Custom red copper (L/N/G), electronic-grade gold + rhodium plating, cryo-treated at -196°C
-
Female Connector (F3 RC): High-conductivity copper (L/N/G), nano-copper + gold + rhodium plating, cryo-treated
-
Blades: Ultra-slow precision polishing, proprietary magnetic alloy structure, integrated EMI field dissipation
-
Shell: Signature Red nano-dielectric core, high-strength vibration-damping Tai-Chi polycarbonate
-
Cable Entry Range: Ø10–19mm
-
Dimensions:
‧ Male – Ø38 × 77mm | Weight: ~60g
‧ Female – Ø38 × 79.5mm | Weight: ~70g