簽名旗艦下放、單結晶OCC上身，怎能放過追求真實的最短捷徑
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
繼MAQ-603、601的用家好評回饋後，時隔一年，我們再推出一款「MAQ-602」，這款融合603、601的設計理念，以SZZ-3.2 6N OCC單晶銅導線，搭配旗艦款公母頭Signature Red，以沒有音染的聲音、聽起來自然均衡，完全沒有癖性，音場的深度與寧靜感直追KenStyle系列，是一款絕對值得玩家為音響銘機替換的一條端正好線。
MAQ-602線身採用SZZ-3.2 6N OCC單晶銅導體，我們從原銅開始就嚴選高純精煉銅，在製線的過程中，一步步調整線徑、慢速退火、去除應力，利用製程技術、再次提升精純度，直到超越符合要求，最終設計以9蕊絞繞成一股、三相分別集七股等速Ｓ絞繞製成一線，並強化壓縮處理，讓每一相線都是等距、等壓、等角度的全均衡絞線製程，最後再以Stress-free無應力工序處理，讓每條線不僅均長一致、更無應力干擾，直達最佳的處理狀態。此款線在第一道介電防護與4.0、5.6不同，採用了HDPE、TPE雙層防護，其高強度、高彈性、耐溫、耐候性等……特性，為MAQ-602建立出堅實安全的介電基石，線身九道的介電抑振防護，包含了添加功能性微量奈米粉末的塑料層、制振棉線、絕緣紙等……間隙結構層，其中，最外層的TPV原料之中，加入了微量的奈米陶磁粉，利用微量紅外線釋放能量，讓聲音更加延伸出頻，同時強化防護、安定磁場。此外，這九層中還有兩道銅屏蔽層，讓防護不只能治振抑振、完備電能最佳的傳輸通道，更能阻擋外在的各種EMI、RFI射頻噪訊的干擾，100%保護內部電源能量的完整傳輸。
而這回MAQ-602所搭配的公母頭，是旗下旗艦款之一的Signature Red簽名版隔離抑振公母頭，也是旗下首款以非塑料外殼的設計，主體外殼採用非磁鋼合金、搭配上高強度碳纖維，全部以最高規格的製程製作，銅材導件、打磨、電鍍、導磁技術、無應力處理等……，L/N/G 三相導件採訂製紅銅，表面均質化後，再經電子級鍍金＋鍍銠（公）與電子級鍍銅＋鍍金＋鍍銠（母），而公、母頭的電鍍處理會略有不同，是因為主事者張哿健先生（Ken Chang）經過了一次次的試驗，最終認定其聲音表現是最符合他對於聲音美學的最高標準，端子上的每個角落都有其用心處理的地方，就像插座尾端的10個小孔，不單只是為了美觀而已，更是為了能夠抑振、導振；碳纖維也是特別挑選特定強度、模數，太硬、太軟、太密、太疏都不行，出來的聲音就是會不對味，這些都不是一般玩家所會注意到的，但聲音就是這麼敏感，多一分少一分、聽起來就是會有差異。
我們將三十多年的工藝結晶與品牌精神貫注其中，不僅追求電能的極致，更在乎友善環境的環保製程，我們以嚴謹的製作工序，達成最佳的電能傳輸效率，將電源完整的傳送至末端音響設備裡。同時堅守著正確且純淨的用電基準，讓音響接收最乾淨無染電源，如此才能回饋出音響最忠實的聲音，聲音才能深入心坎、感動人心，追求真實的最短捷徑、選擇MA靜神準沒錯。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
三相導體採用無應力6N OCC高純度單結晶銅（單相 9蕊/7股）
包覆九道完備的介電、抑振防護
線身上裝配有特殊橄欖型合金抑振器
Signature Red 旗艦公母頭：L/N/G 採訂製紅導銅：表面電子級鍍金＋鍍銠（公）／ 電子級鍍銅＋鍍金＋鍍銠（母）
旗艦公母頭導件：超慢速細緻打磨、獨特導磁铜片結構、固線方型銅結構、-196°C超低溫處理
旗艦公母頭外殼：以整塊非磁鋼合金錠精密CNC削銑、搭配上高強度特殊比絲數碳纖維、MA靜神獨家的「中心固線」專利技術、抑振導振尾孔設計
導體：三相（水、火、地）採用3.2mm2 6N OCC高精純單結晶銅
線身：九道介電隔離防護（HDPE、三色TPE、抑振棉線條、兩層絕緣紙、微導PVC、科技銅皮、OFC銅屏蔽網、棕色TPV）
耐壓：250V/15A
長度：約 1.8 m（可接受長度訂製，所有工序製程比照正規線，價格計算以米/公尺(meter)為單位，每米加價以正規品售價20%為計。）
重量：約 785 g
※MA靜神自行開發的電源公母頭，內部使用了獨家導磁銅片，用家請勿隨意自行拆卸，以免發生短路意外。
※MA靜神前後端線材最終的配置建議，是我們依線材特性表現，與在MA靜神高端標準的Hi-End實驗室中，以繁複的程序實際聆聽為基準；
配置建議非絕對值，用家也可自行配置，調合出擁有個人風味的系統聲音。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MAQ-602 Finish AC Power Cable (NEMA Type)
Signature Flagship DNA — 6N OCC Purity, The Shortest Path to Sonic Truth
Following the success and acclaim of the MAQ-603 and MAQ-601, Monitor Acoustics proudly presents the MAQ-602, a next-generation power cable that inherits the design philosophies of its predecessors while achieving a unique balance between performance and purity. Built around a SZZ-3.2 6N OCC monocrystalline copper conductor, and terminated with our high-end Signature Red AC plugs, the MAQ-602 delivers a natural, uncolored, and perfectly neutral sound. Its deep soundstage and pristine quietness are on par with our renowned KenStyle series—making it a top contender for system upgrades in pursuit of sonic honesty.
The MAQ-602 conductor begins with ultra-pure, slow-annealed 6N OCC copper, processed through Monitor Acoustics’ proprietary stress-free S-Z spiral geometry. Each phase (L/N/G) consists of a twisted bundle of 9-core / 7-strand configurations, achieving perfect equidistant pressure, twist angle, and impedance. Enhanced with precision compression treatment and refined through our exclusive annealing process, the cable reaches an ideal state of internal balance and transmission stability.
The dielectric system features a dual-layer HDPE + TPE insulation, offering high strength, flexibility, heat resistance, and environmental stability. A total of nine layered dielectric and damping structures—including vibration-damping cotton, insulation paper, nano-particle-enhanced PVC, and a final TPV jacket—shield and protect the signal path. The outer TPV layer is specially infused with nano-ceramic particles, releasing far-infrared energy that enhances resolution and spatial definition. Two advanced copper shielding layers (braided OFC mesh + metallized copper film) offer full-spectrum EMI/RFI rejection and ensure uninterrupted power transmission.
Terminated with our flagship Signature Red AC plugs, the MAQ-602 stands as one of Monitor Acoustics’ most refined creations. The non-plastic housing is CNC-machined from non-magnetic steel alloy billets, paired with carefully selected carbon fiber composites for optimal damping and resonance control. The conductors use custom-machined pure red copper blades, with differential surface treatments:
- Plug (male): Gold + Rhodium over high-purity copper
- Socket (female): Copper + Gold + Rhodium layering
All metal components undergo cryogenic treatment at -196°C, ultra-slow polishing, and proprietary magnetic conductivity tuning to match the exacting sonic standards of founder Ken Chang. Details like the ten vibration-vent holes at the rear of the plugs and precision-blended carbon fibers are not cosmetic—every element serves a specific acoustic purpose.
Infused with over 30 years of craftsmanship and audio research, the MAQ-602 doesn't just optimize electrical transmission—it does so through an environmentally conscious manufacturing process. Designed to deliver the cleanest, most uncolored power to your equipment, it lets your audio system perform with the purity and emotion the original recording intended.
FEATURES
- Conductors: 3 × 3.2mm² 6N OCC monocrystalline copper, stress-free twisted in S-Z balanced geometry
- Dielectric: Nine-layer shielding system including HDPE, color-coded TPE (brown/blue/green), damping cotton, dual insulation paper, nano-enhanced PVC, OFC braided mesh, metallized copper foil, and outer TPV infused with nano-ceramic particles
- Includes a special olive-shaped alloy resonance damper on the cable body
- Signature Red AC Plugs (Male & Female) with custom red copper terminals
- Plug: Gold + Rhodium plating
- Socket: Copper + Gold + Rhodium plating
- Cryogenic treated contact blades at -196°C
- High-density carbon fiber + CNC-milled non-magnetic steel alloy housing
- Proprietary vibration-damping terminal design with “centered clamping” structure
- Voltage/Current rating: 250V / 15A
- Length: Approx. 1.8 m (custom lengths available; price +20% per additional meter)
- Weight: Approx. 785 g
CAUTION:
Monitor Acoustics' exclusive plug design contains internally mounted magnetic copper elements. Disassembly is not recommended to avoid electrical short or physical damage.
NOTE:
Cable configuration is based on exhaustive in-house listening tests in MA's high-end reference lab. While we offer placement suggestions, final implementation may be customized by the user to suit their personal sonic preferences.