Isolation power block 抑振隔離電箱

MA-PB125A-4 Master J Isolation power block

100~125A單相4路輸出,專門設計給進入音響室前的隔離分流避震電箱
  • aa
  • bb
詳細介紹

讓MA靜神以成熟、高層次的隔離抑振電箱,匯聚電源能量之庫,展現全頻寬的分流性能

成功的電箱要件,不外乎擁有完整的設計、縝密的佈局、執行優質高效的能量分配,並快速釋放電位差,讓電能以充沛且快速的電路前進。MA靜神一直追求著自我的極限,旗下隔離抑振電箱經歷了數代的演進,採以最完善、完整的線路佈局,加上精良且特殊的零組件,將入戶電能作第一次的醇化處理。

MA靜神的隔離抑振電箱,內外部件全都採用訂製組件,箱體採用厚鐵鍍鋅、並覆以特殊高溫烤漆處理,給予隔磁、抑振、穩固的基石,內部斷路器採用台灣大廠的「客製」無熔絲閘,從外觀看來與一般市售相仿,常被質疑為何不用國外知名的品牌,但這樣的崇洋心結,不僅看低台廠,也完全低估了MA靜神的嚴苛標準;與我們合作的台廠,其技術與性能都可依需求要求、且支援度高,再複雜的工序都能幫忙搞定,並強化高規結構製程封裝,如無熔絲的核心介電,在持續不斷的大電流經過絕緣材時,能夠完全隔絕電磁輻射與弱電的干擾,確保高介電值、耐大電流電壓的高效性能,完整傳輸極大化的電能頻寬,這些都是現成市售品所無法相比的。MA靜神歷經長時間的開發研究,專注於精確的音響電源這領域,將別人做不到的極寬頻,透過「MA靜神電源系統」重新展現,這是市面上常見的拼裝電源所到達不了的,而MA靜神堅持關鍵的每個環節都不能錯放,最終才能擁有豐潤、飽滿、充沛、純淨的寬頻電能。

此外,L相(火線)、N相(水線)的分閘不用一般傳統的電源線,採用特別訂製的高階銅板,經CNC切型後、處以細緻打磨,最後鍍上電子級貴金屬,保持最佳的金屬物理條件,其耐高電壓、高電流、高速傳導的特性,與半永久性的穩定條件,展現出極為優異的電源傳輸性能,表現出不凡的全方位導電能力。

而同樣工法也用在G相(地線)上,搭配上PG-16接地匯流排,讓電位差能更加快速的釋放。箱內更為了隔離與抑振,特別加上金屬隔離板與增加強化結構點,讓全頻寬電源在安定穩固的機箱內流暢地分流出去,任何會影響電源品質的小細節都不放過;玩家還能選購MA靜神的「Basic MKⅡ or Studio MKⅡ 超級接地器」、「M-460 複合地迴接地板」,更能讓接地的性能翻倍躍進,這同時也是淨化電源的重要核心之一,我們強烈建議「進入室電的第一步」千萬不容小覷,別讓拼裝車在一開始就虛化了電源能量,選擇MA靜神電源系統,將是您翻轉平凡電源的第一步,極致音響電源的無限可能從此開始。

Let MA 靜神 mature, high-level isolation and damping power box gather the energy pool of power supply and demonstrate full-bandwidth shunt performance.

The success of a power box depends on complete design, meticulous layout, high-efficiency energy distribution, and fast release of potential difference, allowing electric energy to flow through abundant and rapid circuits. MA Jing-Shen has been pursuing the limits of itself and its isolation and damping power box has undergone several generations of evolution. It adopts the most complete and comprehensive circuit layout, coupled with sophisticated and special components to handle the first refining of incoming electrical energy.

MA 靜神 isolation and damping power box uses customized components both internally and externally. The chassis is made of thick galvanized iron and treated with special high-temperature baking paint, providing a foundation for insulation, damping, and stability. The internal circuit breaker uses a "custom" fuseless circuit breaker from a major Taiwanese manufacturer. Although it looks similar to general market products, it is often questioned why a well-known foreign brand is not used. Such an inferiority complex not only underestimates Taiwanese manufacturers but also underestimates MA 靜神 stringent standards. The Taiwanese manufacturers we cooperate with have high technical and performance support, can provide customization according to requirements, and can handle even the most complex processes. They also strengthen the high-specification structure packaging process, such as the fuseless core dielectric, which can completely isolate electromagnetic radiation and weak current interference when a continuous high current passes through the insulating material, ensuring high dielectric value and high current voltage resistance and maximizing the transmission of high-bandwidth electric energy. These are beyond the capabilities of ready-made commercial products. MA Jing-Shen has undergone a long period of development and research, focusing on precise audio power supply technology, and is able to demonstrate an extremely wide bandwidth that other power supplies cannot achieve through the "MA Jing-Shen Power System". MA 靜神 insists that every critical link cannot be missed, in order to ultimately have rich, full, abundant, and pure wide-band electric energy.

In addition, the L-phase (live wire) and N-phase (neutral wire) are not separated by the general traditional power cord, but use specially customized high-end copper plates, which are cut by CNC and finely polished, and finally coated with electronic-grade precious metals to maintain the best physical condition of the metal. Their characteristics of high voltage, high current, and high-speed conductivity, as well as their semi-permanent stability, demonstrate excellent power transmission performance and extraordinary all-around conductivity.

The same technique is also used for the G (ground) phase, combined with the PG-16 grounding busbar, so that the potential difference can be released more quickly. Inside the box, metal isolation plates and reinforced structural points are specially added for isolation and damping, allowing the full-bandwidth power to smoothly flow out in a stable and solid chassis, leaving no detail that could affect the power quality overlooked. Players can also choose the "Basic MK II or Studio MK II Super Grounding Device" or the "M-460 Composite Ground Looping Floor" from MA 靜神 to double the grounding performance. This is also one of the important cores of power purification. We strongly recommend not underestimating the "first step into room power." Don't let the assembled car dissipate the power energy from the beginning. Choosing the MA 靜神 power system will be your first step in transforming ordinary power, and the infinite possibilities of ultimate audio power will begin from here.


MA-PB125A-4 Master J Isolation power block 100~125A單相4路輸出隔離避震電箱​​​​​​
  • 100~125A單相隔離電源輸入、4路輸出
  • 專門設計給進入音響室前的隔離分流避震電箱
  • 穩固且防震的電箱結構設計
  • 優質厚導電銅板,並處以精緻拋光
  • -196°C深冷處理
  • 機箱採用特殊高品質噴砂烤漆處理
  • 外部尺寸:W33.8 x H50.5 x D12cm
  • 重量:約 15.65 kg±5%

MA-PB125A-4 Master J Isolation Power Block

Isolation power block 100~125A Single Phase 4way output.
It has a Single Phase isolation power input and is specifically designed for use as an isolation and shock-resistant distribution box for audio rooms. 
The electrical box has a sturdy and shock-resistant structural design, and is made with high-quality, thick conductive copper plates that are polished to a fine finish. 
The plates are cryogenically treated at -196°C to ensure optimal performance. 
The electrical box is coated with a special high-quality sandblasted paint, 
Vibration-proof structure Conductive copper, polished handle, high-end electroplating, cryogenic treatment.

External Dimensions: W33.8 x H50.5 x D12cm
Weight: 15.65 Kg ±5% (Product weight varies by accessory.)