大能量、內阻低、提供一條寬敞的電能大道
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
會捨棄音響原廠的電源線，另外選購新線的玩家們都明白，一條線的好與壞落差極大，但玩家很難從線的外表去判斷線材好壞，只能從線材廠提供的資料上去判斷，或是直接上機實際用耳朵判斷，但這樣的選擇無法確切直達核心，雖然一定會比原廠的小黑線好，但是對線材有研究的專業廠家，一定會針對器材類型與需求去設計，並針對數位、前級、DAC、轉盤等……前端設備，或是高耗電需求的後級、多聲道擴大機等……後端設備，分別設計出專用的電源線。
MA靜神旗下的「MaQ-102-R」入門款隔離電源線，是專為後端需要大電流、低內阻所設計，同樣擁有優質量、使用壽命長的優勢，融入我們重視的電源表現力，與MA靜神賦予的能力，102-R內部的三相導線採用5N LC-OFC與4N OFC的組合，擁有低內阻、耐高電流的性能，並經過多道的抑振介電處理，其中一層更特別以科技銅皮、100%完全屏蔽處理，徹底隔絕掉EMI、RFI的電磁射頻干擾，並提供電源無阻寬闊的通道，接駁端採用自家開發的公母頭，展現出超乎入門的表現力。而MA設計這款給後端器材所用的「MaQ-102-R」，線材長度設定在1.5m，適合給大食量後級、管機、多聲道AV擴大機等……電能需求量高的後端設備，利用寬頻流暢的勁道電源，供給音響設備源源不絕的電源，把揚聲器控制得收放自如，展現絕佳的控制力。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
三相導體採用5N LC-OFC、4N OFC (GND)高純度長結晶銅
採用MA靜神自行製作的音響級公母頭 MAQ-R 訂製版
多道特殊介電塑料，搭配科技銅皮、100%屏蔽處理
耐壓：600v / 15A
長度：約 1.5 m
重量：約 550 g
※MA靜神自行開發的電源公母頭，內部使用了獨家導磁銅片，用家請勿隨意自行拆卸，以免發生短路意外。
※MA靜神前後端線材最終的配置建議，是我們依線材特性表現，與在MA靜神高端標準的Hi-End實驗室中，以繁複的程序實際聆聽為基準；
配置建議非絕對值，用家也可自行配置，調合出擁有個人風味的系統聲音。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
MaQ-102-R Finish AC Power Cable – NEMA Type | Isolated Power Cord
High Current. Low Impedance. A Wide-Open Highway for Clean Power.
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
Anyone who upgrades from stock power cords knows — the difference between good and bad cables is massive. But judging a cable just by how it looks? That’s a shot in the dark. Specs help, but they rarely tell the full story. At the end of the day, seasoned listeners know: only trusted design, tailored for your system's specific demands, truly unlocks performance.
At MA (Monitor Acoustics), every cable is built with that mission. Whether it’s for delicate front-end gear like DACs and transports, or power-hungry back-end monsters like multi-channel amps and tube gear — we design with purpose.
The MaQ-102-R is our entry-level isolated power cable engineered specifically for high-drain back-end equipment. Despite its accessible price point, it inherits our signature performance DNA: low impedance, high current capacity, long life, and serious shielding. It’s built to provide a clear, wide, and unrestricted energy path to your amplifier, letting your system breathe and your speakers stay fully in control.
Inside the 102-R, we use a carefully matched blend of 5N LC-OFC and 4N OFC long-crystal copper conductors. These deliver fast, stable current without saturation or loss. Vibration-damping dielectric layers add physical and sonic stability. One key layer includes a 100% coverage tech-copper foil shield, giving the 102-R exceptional protection against EMI and RFI interference — something even pricier cables often miss.
The proprietary MAQ-R connectors are designed and built in-house, not outsourced. Inside each plug, you’ll find magnetic copper inserts, part of our unique approach to energy transfer and control. No shortcuts, no compromise — just pure, focused performance.
We’ve chosen a 1.5-meter length as the ideal sweet spot for amps and receivers. It balances flexibility and signal integrity while minimizing resonance issues. From powerful AV receivers to robust tube amps, the MaQ-102-R is your amplifier’s new favorite power partner — delivering clean, commanding energy and tight, dynamic control.
FEATURES
- Triple-conductor design using 5N LC-OFC and 4N OFC (ground) long-crystal copper
- MAQ-R custom in-house designed male/female connectors with magnetic copper inserts
- Multiple specialized dielectric layers for damping and insulation
- Full 100% shielding with high-tech copper foil for EMI/RFI protection
- Rated: 600V / 15A
- Length: approx. 1.5m
- Weight: approx. 550g
Note: Do not disassemble MA power connectors — internal magnetic copper plates may cause short circuits if mishandled.
Suggested system pairings are based on extended listening tests in the MA Hi-End Lab. While our recommendations are optimized for performance, users are encouraged to experiment and tune based on personal preference.
