細節工藝的完美呈現，極致影音的一試立現
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
音響玩家對於聲音表現的音頻進化，總是永無止境，在原廠標準化的生產製品下，審核標準不夠高，就容易造成弱音的缺口，為了補足這一塊的不足，我們推出了一系列高端且高效能的電源公母頭DIY套件，提供給喜愛自己動手做的玩家，依照心目中的聲音標準來製作「對的」電源導線。
旗下的「ACE M3/F3 RC」就是針對玩家需求，挑選了高規紅導銅與高強度、耐溫差且抑振的介電核心製作外殼，我們堅持電源的傳導必須是完整且直接，所以在電源公母頭的細節上也同樣是不容忽視，這回在ACE公母頭上的L(火)、N(水)、G(地)的導件做了些許變化，除了母座的G(地)端採用訂製的鈹銅合金外，其他導件全都採用特別訂製的紅導銅製成，硬度適中、耐插拔，最後再將導件以超慢速細緻打磨處理，細膩表面將更利於後段製程加工，最後將導體鍍上電子級高純金與貴金屬銠，優化導件表面強度與電源傳輸。此外，我們除了將三相導件以-196°C超低溫處理外，更在L(火)、N(水)、G(地)之間加入特殊導磁結構設計，讓三相電能不致相互干擾，確保電源能夠無染地純淨直通，加上穩固方形入線結構設計，將阻抗降至最低，保持最佳的傳輸條件，一切細節都不放過。介電塑料方面同樣也是不容輕忽，採用獨特ACE複合介電奈米塑料為核心，搭配上高強度、耐溫差抑振聚碳酸酯外殼。特別的我們在這款「ACE」公母頭上，設計了一組在L(火)、N(水)、G(地)端間以獨有的導磁铜片，利用導磁铜片將核心內空間的浮動磁場引導至地迴釋放，這項淨化浮動磁場至地迴的技術，更能夠持續不間斷地消除殆盡污磁，讓L(火)、N(水)、G(地)線電專注其職、互不干擾，導通出最純淨無瑕的電能，進一步確保內部電源不受外界侵擾，保持電能快速直通且無干擾的傳遞。
「Monitor Acoustics 靜神」始終堅持著產品一定要台灣製作，所以我們「從頭開始」就自主規劃，從結構的發想、電路的設計、材料的選用，一切全都是親力親為、不假手於外人。這些外人看似平常的電源配件，其實隱含著許多職人們的工藝細節在裡頭，我們用盡心力將產品做到最好，相信在用家使用過後，也能體認到我們背後的努力與用心，我們堅信產品要符合好聲的標準、效率要高、品質要好，所有細節都不能錯放，因此「ACE M3/F3 RC」就這樣誕生了。
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
FEATURES 特點：
公頭 male: L/N/G 訂製紅導銅、鍍金＋鍍銠
母頭 female: L/N 訂製紅導銅、鍍金＋鍍銠 /G 訂製鈹銅合金、鍍金＋鍍銠
導件：超慢速細緻打磨、獨特導磁合金結構、-196°C超低溫處理、導磁消磁技術
塑料：ACE複合奈米介電核心、高強度耐溫差抑振聚碳酸酯
入線直徑範圍：10～19mm (Φ)
尺寸：公頭-約38×77mm (Φ×H) / 母頭-約38×78.5mm (Φ×H)
重量：公頭-約61g / 母頭-約70g
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
ACE M3/F3 RC AC Plug & Connector
Where Craftsmanship Meets Purity – Experience Ultimate Audio Precision in a Single Try
﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏﹏
The pursuit of sonic perfection is endless for true audiophiles. Mass-produced components from original equipment manufacturers often lack the rigorous standards required for refined sound reproduction, especially in the subtleties of low-level detail. To address this gap, we introduce a series of premium, high-performance DIY AC plug and connector kits — made for discerning enthusiasts who prefer to craft power cables tailored to their own sonic ideals.
The ACE M3/F3 RC was born from this passion. Engineered with precision, it features specially commissioned high-purity red copper conductors, housed within a dielectric core made of ACE proprietary nano-composite material. The outer shell, constructed from high-strength, temperature-resistant, and vibration-damping polycarbonate, ensures durability and isolation from external interference.
In this enhanced version of the ACE series, we’ve refined the contact architecture:
– The male connector uses customized red copper conductors for L (Live), N (Neutral), and G (Ground).
– The female connector combines red copper for L and N with a beryllium copper alloy for the G terminal, providing optimal resilience and electrical performance.
All conductors are meticulously slow-polished to achieve a mirror-smooth surface, enhancing conductivity and facilitating precision during assembly. Each piece is then electroplated with electronic-grade gold and ruthenium to increase surface strength and ensure lossless transmission.
To eliminate electromagnetic interference, each conductor undergoes ultra-low-temperature cryogenic treatment at -196°C, and a magnetically-guided alloy structure is embedded between L/N/G terminals to reduce cross-talk between phases. Additionally, an exclusive internal demagnetization copper plate system actively drains residual magnetic fields into ground, preventing field buildup and ensuring clean, unpolluted current flow.
Every detail — from the square-type wire clamp, which minimizes impedance, to the dielectric material selection — has been rigorously evaluated to uphold the highest standards of signal purity and power transfer.
At Monitor Acoustics (Jing Shen), we proudly design and manufacture all products in Taiwan. From structural planning to materials selection and final engineering, every aspect is crafted in-house with unwavering attention to detail. These seemingly simple components embody the spirit of true craftsmanship — and once experienced, we believe you’ll feel the care and precision behind every piece.
FEATURES
Male Plug
- Custom high-conductivity red copper contacts (L/N/G)
- Gold + rhodium dual-layer plating
- Ultra-fine mirror polishing
- Integrated magnetic isolation structure
- Cryogenic treatment at -196°C
Female Connector
- L/N: Custom red copper / G: Custom beryllium copper alloy
- Gold + rhodium dual-layer plating
- Ultra-fine mirror polishing
- Magnetic isolation structure with internal demagnetization copper plate
- Cryogenic treatment at -196°C
Materials
- ACE nano-composite dielectric core
- High-strength, temperature-resistant, vibration-damping polycarbonate housing
Specifications
- Cable inlet diameter: Ø10–19 mm
- Dimensions: Male – Ø38×77mm / Female – Ø38×78.5mm
- Weight: Male – approx. 61g / Female – approx. 70g